16+2 Poe 1000M Network Switch 240W 48V 16 POE Ports 2 Uplink SFP Slot 250m Transmission for IP Camera Wireless AP POE Camera

$ 119.99

Plug EU Plug / Plug US Plug /

SKU: HOB1816578 Category:

Port:16 * 100M POE
2 * 1000M uplink
1 * SFP expansion slot (non combo)
Performance:Store and forward:support
Exchange content:9.2G
MAC address table:8K
Use environment:Working temperature:0 鈩冿綖 40 鈩o:p>
Storage temperature:- 40 鈩~ 70 鈩o:p>
Working humidity:10% 锝90% RH, non condensing
Storage humidity:5% 锝90% RH, non condensing
Poe standard:1.The maximum power of standard ieee802.3af/at single port is 30W, and the maximum power of the whole machine is 240W.
2.Support full protection of over-current, over-voltage and short circuit.
3.Support high power PD soft start.
4.Support sequential startup
Input power:AC input 110V-220V 50 / 60Hz
Supported standards and protocols:1.IEEE 802.3 Ethernet MAC protocol
2.IEEE 802.3i 10Base-T Ethernet
3.IEEE 802.3u 100base-tx Fast Ethernet
4.IEEE 802.3ab 1000BASE-T Gigabit Ethernet
5.IEEE 802.3af implements power supply for Ethernet devices through Ethernet data line pairs or devices
6.IEEE 802.3at realizes high power power supply of Ethernet equipment through Ethernet data line pair or equipment
7.IEEE 802.3x flow control
Default system mode:General switch / 250m transmission
Data transmission rate:1.Ethernet 10Mbps half duplex, 20MBps full duplex
2.Fast Ethernet 100Mbps half duplex, 200Mbps full duplex
3.Gigabit Ethernet 2000mbs full duplex
Port lightning protection:Common mode:2000V
Differential mode:500V
Network media:1000BASE-T:4 pairs of CAT5e or above UTP / STP (鈮100m)
100base TX:2 pairs of CAT5 or above UTP / STP (鈮100m)
10base TX:2 pairs of CAT6 or above UTP / STP (鈮250m)
– Comply with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standard;
– Support IEEE802.3 at / AF standard, compatible with receiving equipment (PD) supporting IEEE802.3 at / AF
– It supports three transmission modes:general switch / 250m / VLAN isolation (customized function)
– Provide 16 10 / 100M adaptive Poe power supply ports, 2 uplink 10 / 100 / 1000m adaptive RJ45 ports, 1 independent SFP, expansion slot (can be connected with SFP fiber module).
– All ports support auto MDI / mdi-x function.
– Support ieee802.3x full duplex flow control and backpressure half duplex flow control.
– All ports have line speed forwarding capability.
– Self learning and aging supporting MAC address.
– All metal shell, desktop structure (optional special rack lug), full load 240W.
Package Included
1 *
16+2 Poe 1000M Network Switch
1 * Power adapter

Weight 0.4 kg


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.