There are not serious wrinkles on the surface of the product that do not affect the function.
Clean the bottom of the hot bed before use, and tear the adhesive back to the bottom of the hot bed.
1 x 220*220 Heat Insulation Cotton
Please pay attention when using
1.Please clean the surface you want to paste.
2.The insulator material is firmly matched with the metal plate to achieve the best bonding and damping properties.
3.Do not cover the chassis wiring or air holes during installation.
4.Proper use of tape will enhance the link effect.
5.Stick the damper plate, which can be heated by a hair dryer to make it soft and then compacted by hand.If the room temperature is below 5 degrees Celsius, first heat it with a sun lamp until the insulation wool is soft, then remove the wax paper paste.
6.In the process of successful installation, it is best not to repeat the tearing paste, the paste effect will not be damaged.
7.Additional insulation can be stuck together in a hidden place.
220*220*10mm Black Foil Self-adhesive Heat insulation Cotton with Black Glue for 3D Printer Heated Bed
Only logged in customers who have purchased this product may leave a review.