TMC2130 V1.1 Stepstick Stepper Motor Driver for SPI Function with Heat Sink for 3D Printer

Features
1.Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor operating current can be adjusted
2.SPI only
3.Subdivided into 256
4.Noiseless operation combined with maximum efficiency and optimal motor torque
5.High-precision sensorless motor load detection
6.Reduce energy consumption by 75%
7.High load drive is not out of step
Specifications
– Product Name:TMC2130 V1.1 Stepstick Stepper Motor Driver
– Motor input voltage range:4.75~46V
– Logic interface input voltage:3 ~ 5V
– Interface:Step/Dir or SPI
– Configuration:CFG Pins or SPI
– Native Microsteps*:up to 1/256
– MicroPlyer
– Microsteps:1/256
– Logic Voltage VIO:3-5V
– Motor Voltage VM:5.5-46V
– Motor Phase Current:1.2A RMS, 2.5A Peak
– VM always needed**:yes
– Internal V- Regulator**:enabled
– RDSon:>=0.5 Ohm
– StealthChop (quiet):yes
– SpreadCycle:yes
– CoolStep:yes
– StallGuard:yes
– DcStep:yes
Note
* Due to different producing batches, product details might be a little different.Thank you for understanding.
Package Included
1 x TMC2130 V1.1 Stepstick Stepper Motor Driver
1 x With plastic heat sink
1 x Screwdriver
1 x 4pin connection cable